do not scale from this print .157 3.99 ref (no of pos x .07874 [2.000]) - .015 + .005 .03937 1.000 ref .07874 .0040 2.00 0.10 (no of pos x .07874[2.000]) - .07874[2.000] ref 2 max sway (either direction) tmmx-xx-d-x 02 01 100 99 c1 [.13] [.38] .020 sq 0.50 ref .0790 ref 2.007 "a" contact area (see note 4) 2 max sway (either direction) t-1s13-xx-xx-2 .277 ref 7.04 (see note 7) .06 ref 1.5 .099 - .002 + .005 2.52 - 0.05 + 0.13 (see note 2) 90 3 2 max sway (either direction) .004[.10] bv bv specify pos -xxx to be omitted polarization lead style -dv: double vertical (use tmmx-50-d-x-xx) row option -m: pick & place pad (use ppp-10) (see fig 3; 5 pos min) (-t, -tm plating with -m available to existing customers only as of rev bv. do not design in.) -tr: tape & reel packaging (36 pos max contact samtec for larger positions.) -es: end shrouds (see fig 4, sht 2, 9 pos min) -ec: locking clip (see fig 6, sht 3, 9 pos min, do not use with -a or -lc, see note 8) -ep: guide post (see fig 9, sht 2, 9 pos min) -el: board lock (see fig 5, sht 2, 9 pos min) -lc: flex mold locking clip (use lc-09-tm, see fig 2, sheet 2, 5 pos min, see note 8) -a: alignment pin (use tmmh-50-d-a-xx, see fig 2, sheet 2 3 pos min) -ebc: board lock with locking clip (see fig 8 sht 2, 9 pos min not available with -a or -lc, see note 8) -epc: guide post with locking clip (see fig 7, sht 3, 9 pos min not available with -a or -lc, see note 8) options plating -01: .126 [3.20] (use t-1s13-07-xx-2) -04: .075 [1.91] (use t-1s13-04-xx-2) -05: .065 [1.65] min (use t-1s13-20-xx-2) -02 thru -50 (per row) no of pos -l: 15" light selective gold in contact area, matte tin on tail -f: 3" flash gold in contact area, matte tin on tail -s: 30" selective gold in contact area, matte tin on tail -g: 20" gold in contact area, 3" min gold on tail -t: matte tin on contact and tail -h: 30" heavy gold in contact area, 3" min gold on tail -tm: matte tin contact and tail -lm: 15" light seclective gold in contact area, matte tin on tail -sm: 30" selective gold in contact area, matte tin on tail -fm: 3" flash selective gold in contact area, matte tin on tail tmmh-1xx-xx-xx-dv-xxx-xxx ** ** all options except the -ex options use the tmmc-50-d-x-xx -ex options use the tmmh-50-d-x-xx c fig 1 (tmmh-150-xx-xx-dv shown) sheet of unless otherwise specified, dimensions are in inches. tolerances are: decimals angles .xx: .01[.3] 2 .xxx: .005[.13] .xxxx: .0020[.051] 2mm x 2mm terminal strip assembly by: dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing purvis 10/08/1996 4 1 sheet scale: 1:1 f:\dwg\misc\mktg\tmmh-1xx-xx-xx-dv-xxx-xxx-mkt.slddrw material: bodies: lcp, ul 94 vo color: black terminal: phosphor bronze, alloy max. cut flash: .020 [.51] notes: 1. represents a critical dimension. 2. measured at bend radius, not at end of pin. 3. tube only -05 through -50 positions. 4. gold plating to be on post, tin plating on tail. 5. parts may be cut to position. 6. minimum pushout force: 1.0 lb. 7. surface mount tails to be sheared to dimension on style -05 only. 8. due to the high amount of insertion force needed, the -lc option is not compatible with auto placement. samtec recommends manual placement for all assemblies with the -lc, -ec, -ebc and -epc options. 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322 tmmh-1xx-xx-xx-dv-xxx-xxx-mkt revision bv
bv ppp-10 (different as shown, otherwise same as fig 1.) fig 3 -m .400 10.16 ref (no of pos x .07874[2.000] -.4000[10.160])/2 .020[.51] bv "b" .125 .010 3.18 0.25 (see note 7) in-process for style -05 "b" in-process 1 .045 1.14 "b" in-process 3 - .15784[4.000] (no of pos x .07874[2.000]) fig 2 .075 1.90 .043 1.09 -a .060 1.52 .056 ref 1.42 bv -lc lc-09-tm + .115[2.92] .008 (no of pos x .07874[2.000]) "d" "c" ref .387 ref 9.83 bv bv tmmh-es-xx .250 6.35 ref fig 4 -es (different as shown, otherwise same as fig 1.) (different as shown, otherwise same as fig 1.) sheet of 2mm x 2mm terminal strip assembly by: dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing purvis 10/08/1996 4 2 revision bv f:\dwg\misc\mktg\tmmh-1xx-xx-xx-dv-xxx-xxx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322 tmmh-1xx-xx-xx-dv-xxx-xxx-mkt
bv bv bv .417 10.59 ref .250 6.35 ref no of pos .07874[2.000] + .175 [4.45] .288 7.32 ref "e" ref no of pos x .07874[2.000] +.161[4.09] .134 3.40 ref .112 2.84 ref bv tmmh-el-xx .157 4.00 ref "f" bv +.110 [2.79] .008[.20] no of pos x .07874[2.000] "k" .422 ref 10.72 "j" ref bv bv .080 2.03 .052 1.32 .056 1.42 ref lc-05-tm .250 6.35 ref +.185 [4.70] .008[.20] no of pos x .07874[2.000] tmmh-ec-xx .447 ref 11.35 "g" ref "h" +.110 [2.79] .008[.20] no of pos x .07874[2.000] no of pos x .07874 [2.000] +.235 [5.97] .008[.20] bv bv .075 ref 1.91 "i" ref .080 2.03 .056 ref 1.42 .052 1.32 bv lc-05-tm no of pos x .07874 [2.000] +.160 [4.06] .008[.20] .250 6.35 ref tmmh-ep-xx fig 5 -el (different as shown, otherwise same as fig 1.) fig 6 -ec (different as shown, otherwise same as fig 1.) fig 7 -epc (different as shown, otherwise same as fig 1.) sheet of 2mm x 2mm terminal strip assembly by: dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. purvis 10/08/1996 4 3 sheet scale: 2:1 f:\dwg\misc\mktg\tmmh-1xx-xx-xx-dv-xxx-xxx-mkt.slddrw revision bv 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322 tmmh-1xx-xx-xx-dv-xxx-xxx-mkt
bv bv bv "g" ref .447 ref 11.35 - .1575[4.000] (no of pos x .07874[2.000]) no of pos x .07874 [2.000] +.235 [5.97] .008[.20] "h" bv bv bv no of pos x .07874 [2.000] +.160 [4.06] .008[.20] .250 6.35 ref tmmh-ep-xx "i" ref .075 ref 1.91 .080 2.03 .052 1.32 .056 1.42 ref lc-09-tm pt-tmmh002-dv-ex-p pt-tmmh001-dv-p pt-tmmh001-dv-p pt-tmmh002-dv-ex-p pt-tmmh002-dv-ex-p pt-tmmh002-dv-ex-p +.110 [2.79] .008[.20] no of pos x .07874[2.000] .288 7.32 ref .112 2.84 ref .134 3.40 ref "e" ref bv bv tmmh-el-xx no of pos x .07874[2.000] +.175[4.45] .250 6.35 ref .417 ref 10.59 .157 4.00 .080 2.03 .052 1.32 .056 1.42 ref "f" ref bv lc-05-tm .447 ref 11.35 "g" ref no of pos x .07874 [2.000] +.235 [5.97] .008[.20] "h" bv bv no of pos x .07874 [2.000] +.160 [4.06] .008[.20] .250 6.35 ref tmmh-ep-xx "i" ref .075 ref 1.91 bv packaging view fig 8 -ebc (different as shown, otherwise same as fig 1.) fig 9 -ep (different as shown, otherwise same as fig 1.) fig 10 -ep-lc (different as shown, otherwise same as fig 1.) sheet of 2mm x 2mm terminal strip assembly by: dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. purvis 10/08/1996 4 4 sheet scale: 2:1 f:\dwg\misc\mktg\tmmh-1xx-xx-xx-dv-xxx-xxx-mkt.slddrw revision bv 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322 tmmh-1xx-xx-xx-dv-xxx-xxx-mkt
|
